★ Broken sprinkler? We’ll fix it fast.

Sprinkler Repair in Dallas–Fort Worth

Sprinkler repair in Dallas–Fort Worth is fast and upfront with Lone Star Irrigation. A licensed irrigator finds the fault, quotes it in writing, and gets the repair done right the first time.

Most repairs are finished in a single visit
Done Right the First TimeTCEQ-licensed irrigators
Upfront PricingQuote before we start
Open 7 Days in SeasonMarch through November
What we fix

Sprinkler system repair for common problems

Heads broken, tilted or buried

Snapped by mowers, sunk over time, or spraying the sidewalk instead of the lawn. Replaced and re-aimed the same visit.

A zone that won't run (or won't stop)

Usually a bad valve or wiring. We locate the valve box, test the valve and the wiring, and replace what failed.

Leaks and mystery-high water bills

Soggy patches, bubbling at a head, a meter that spins overnight. Sprinkler leak detection isolates the line and finds it.

Controller & wiring faults

Dead stations, blown fuses, cut wires from fence or pool work. Traced with a locator, not by digging up the yard.

Low pressure, poor coverage

Brown spots aren’t always a watering-schedule problem. A sprinkler system inspection tests pressure zone by zone, and we fix the cause.

Freeze damage

North Texas cold snaps crack backflow bells and split pipe. We repair the damage and can winterize the system to lower the risk next time.

Brands we service & installRain BirdHunterToroIrritrolHydrawiseArmada
Service appointment

How an irrigation repair visit works

1

Contact Lone Star Irrigation

  • Book online or call (817) 663-1762
  • Pick a day and time that’s convenient
  • Schedule your appointment
2

Your appointment

  • Your tech lets you know when they’re on the way
  • Inspects your irrigation system
  • Shows you the fix for your issue, plus anything else you need
  • Gets your approval before any work starts
  • Does a fantastic job
  • Shows you the work and answers your questions
3

End goal: your satisfaction

The job done right the first time, and explained before your tech leaves. See what 415 DFW homeowners say on Google.

Repair service menu

Sprinkler head, valve and line repair

The parts and repairs we handle most in DFW yards. Every one is quoted before the work starts.

Rain Bird irrigation controller installed on a garage wall

Irrigation Controller Replacement & Upgrades

The controller is the brain of your irrigation system. We replace and upgrade both conventional and Wi-Fi smart controllers and program them for reliable, efficient watering. Wi-Fi options provide convenient control from your phone, along with advanced scheduling and weather-based features.

Standard pop-up spray head watering a green lawn

Spray Head Replacement

Broken, leaking, or worn-out spray heads waste water and leave parts of your lawn without proper coverage. A worn head can leak at the base, lose pressure, and keep the rest of the zone from working right. We replace it and adjust the new head for proper height, direction, and spray pattern.

Tall 12-inch pop-up spray head watering a flower bed over a hedge line

Tall Spray Heads for Flower Beds

12-inch spray heads are ideal for flower beds and landscaped areas where taller plants can block standard sprinklers. We replace damaged or improperly sized heads with 12-inch pop-up spray heads to provide better clearance, more consistent coverage, and proper watering throughout the bed.

MP Rotator nozzle spreading slow, even streams over a lawn and bed

MP Rotator Replacement & Zone Upgrades

MP Rotators deliver larger, more consistent droplets with less misting, which is why they water more efficiently than traditional spray nozzles. We replace damaged or worn MP Rotators and upgrade spray zones when it makes sense, for better coverage and less runoff.

Rotor head watering a large lawn, with the Lone Star Irrigation van in the background

Rotor Head Replacement

Rotors are designed to provide reliable coverage for larger lawn areas. We replace broken, leaking, or worn-out rotors and properly adjust the spray distance and pattern to improve coverage, prevent overspray, and keep your lawn evenly watered.

Backflow prevention device installed in a valve box on a gravel bed

Backflow Prevention Device Replacement

Backflow prevention devices help protect the water supply by preventing irrigation water from flowing backward into the plumbing system. We replace damaged, leaking, or failed backflow devices to keep your irrigation system operating safely and properly.

Replacement irrigation valves installed in an open dig in the lawn

Valve Repair & Replacement

Stuck, leaking or dead zones usually trace back to a bad valve or its wiring. We test first, and when the valve has failed we usually replace it, because a repaired valve can’t be warrantied. More on sprinkler valve and solenoid repair.

Rain Bird controller with a wireless rain and freeze sensor receiver

Rain & Freeze Sensors

A working sensor stops the system in the rain and before a freeze. We install, replace and verify them so the savings are real, not assumed.

Added sprinkler heads giving full coverage across a green lawn

Adding Heads & Coverage Fixes

Brown strips and dry corners are usually a coverage problem. We add or relocate heads so every part of the lawn gets watered evenly.

Two Lone Star Irrigation technicians wiring a smart sprinkler controller

Electrical Diagnosis & Wire Tracing

Dead stations, blown fuses and cut wires traced with a locator, not by digging up the yard.

How we quote

Sprinkler repair cost, quoted upfront

Sprinkler repairs vary too much to put a number on a web page. Two houses on the same street can need completely different work, and a head that looks broken is often a valve or a wiring fault upstream. So a licensed irrigator diagnoses the system on site, tells you what is wrong, and gives you the price in writing before any work starts.

  • ★Diagnosis first, price second. We find the fault before quoting, so you are not paying for a guess.
  • ★The quote is the price. Anything that changes the scope is approved by you before it happens.
  • ★No work until you approve. You can say no, and there is no pressure either way.
  • ★Done right the first time. Worn parts are replaced, so the repair holds.
Technician walking a homeowner through a written quote on a tablet in the front yard
Technician adjusting a rotor head while it runs along the curb

Sprinkler repair by city: Dallas, Fort Worth, Plano, Frisco, McKinney, Arlington

Questions

Sprinkler repair questions

What is the average cost to repair a sprinkler system?

It depends on which part failed. A head that looks broken is often a valve or wiring fault upstream, so a licensed irrigator diagnoses the system on site and gives you the price in writing before any work starts.

Usually it’s debris jammed in the riser, a cracked head, or a supply problem on that line. It’s one of the quickest things we diagnose: the fix is often same-visit.

In North Texas: heads snapped by mowers, valves and solenoids failing with age, wiring cut during fence or pool work, and lateral lines cracked by shifting clay soil. All are routine repairs for a licensed irrigator.

Swapping a broken head is a fair DIY job. Valves, wiring and anything touching the main line are where a small repair tends to become a big one: that’s when to call.

Call and we’ll get a tech scheduled. From March through November, appointments run seven days a week, and emergency sprinkler repair is available on weekends, based on availability. We don’t promise response windows we can’t keep on a busy spring weekend.

Yes. Repairs carry a 1-year limited warranty on our workmanship and the parts we install, as set out in our terms.

We don’t perform backflow certification in-house. Give us a call and we’ll make sure it gets handled.

One zone down or the whole system dry,
let's get it running.

4.7★ from 415 Google reviews · Done right the first time · Upfront quotes

Call NowBook Online