Home / Sprinkler Leak Detection & Repair
Sprinkler Leak Detection & Repair in Dallas–Fort Worth
Sprinkler leak detection from Lone Star Irrigation pressure-tests your irrigation system to confirm whether a leak is behind a high water bill or a soggy patch, and whether it is on the irrigation side or the house side.
Signs of an underground sprinkler leak
Irrigation leaks are easy to miss and expensive. The line only pressurizes when a zone runs, so you usually see symptoms before standing water: a water bill that climbed for no reason, one soggy stretch that never dries, a zone that lost its pressure.
The water bill jumped
A meter that spins with everything off is the classic tell. A pressure test shows whether the irrigation mainline is the one losing water.
A patch that never dries
Soggy ground on a dry week means a lateral or main is leaking below. Left alone, it undermines walks and slabs.
Weak heads at one end
Pressure loss along a run points at a cracked pipe or failing fitting between the healthy heads and the weak ones.
How irrigation leak detection works
We open and close every valve, then pressurize the irrigation mainline and watch the water meter. If the meter holds still, the mainline is holding. Then we run every zone, checking for good pressure, leaking heads and water surfacing in the yard. Pressure tests can also show the leak isn’t on the irrigation mainline at all but on the house mainline: if we shut the irrigation system off and the meter keeps running, the leak is on the house mainline or before the irrigation isolation valve.
Sprinkler leak repair
Our pressure tests confirm that a leak exists and narrow down where it is. They don’t pinpoint it underground: that takes a leak location specialist. Once the leak is located, we repair it. You get the price in writing before any work starts, and the repair done right the first time, the same as every sprinkler repair we do. Stuck or leaking valves are covered under sprinkler valve repair.
Leak location is a separate service
Our standard inspection confirms whether a leak exists. When the leak has to be pinpointed underground, leak location is its own service, in three steps.
Test and isolate
We pressure-test the system and narrow the leak down: house side or irrigation side, mainline or zone.
Find and uncover every valve
Every valve has to be located and exposed before a locator can work. How long that takes depends on how hard the valves are to find.
Locate the leak
A leak detection company brings specialized equipment to pinpoint the leak, and we repair it.
Leak detection questions
How do I know if my sprinkler system has a leak?
A water bill that climbed for no reason, one soggy stretch that never dries on a dry week, or a zone that lost its pressure. A meter that spins with everything off is the classic sign.
Will your inspection find exactly where the leak is?
No. Our inspection confirms whether a leak exists, using pressure tests on the mainline and every zone. It doesn’t use the specialized equipment a leak detection company uses, and it doesn’t pinpoint the leak underground. When the leak needs pinpointing, leak location is a separate service.
Is the leak in my sprinkler system or my house plumbing?
A pressure test tells us. If we shut the irrigation system off and the meter keeps running, the leak is on the house mainline or before the irrigation isolation valve, which is plumbing work, not irrigation.
What if the inspection passes but I still think there is a leak?
Some leaks are too small for the meter to register, and a lateral leak may not surface or lose noticeable pressure. If you are still concerned after a passing inspection, we recommend a leak location service.
Can you fix the leak once it is found?
Yes. Once the leak is located, we repair it, with the price in writing before any work starts.
Every week a leak runs,
you're paying for it twice.
4.7★ from 415 Google reviews · Done right the first time · Upfront quotes